Leaderboard

new toy! IC leg straightener! pushes the legs of new chips which are splayed apart slightly into the correct width to fit in boards! works well!!

Well there's a coincidence. I found this a couple of weeks back at a boot sale and the guy wanted a fiver for it. I knew these were expensive 20-30 years ago so I thought it was a good buy.

I've got them, but as Andrew said, no please or thank you

hi guys,so heres the update.finally played it properly and what a beaut.lovely machine.only problem with it now was it didn't pay out.so went back to the psu and went through the circuits to find the 50v ac to run the pay solenoids.found what i needed an wired it up.so wile standing at a distance i switched it on.........all good so far,so i put some coins in an played it till i won some coins back.then.......time to pay out,so pushed the collect and....................absolutely nothing so yet again back to testing,tested the volts,spot on.tested what i could with out taking it all apart again,all seemed ok.so took the board out AGAIN.got it on the bench an tested an tested until i suddenly had a thought.im pretty sure they won't pay out if door is open.so decided this was worth a little try,so put the board back in the machine,shut the door and put some coins in.it then came to pay out time.can any one guess what happened........... bloody thing payed out didn't it. what a twat. so yeah,moral of the story.always check the most easiest and quickest things first.but on a good note.the machine is completely working now.all on the mk1 maygay psu i had spare for donkey kong.sweeeeeeeet. thanks for all of your replys and inputs guys.and yes i will be reporting when the next issue comes up.will ad some pics aswel when i can. oh an yeah thats cool dave when ever you can mate thank you.