Leaderboard

Seems like someone has bought a boat load of none runners cheap they want fixing....

OOOOOOooooo fruit explosion. Maygay M1A so one of two things, either the speaker leads not plugged into the back of the amp , the volume pot is turned all the way down or broken, or the 12v supply is not getting to the program card. SO first things first, open cabinet, check theres a lead plugged into the back of the program card, and turn the volume knob on the card all the way to the right.

I’ve been in the back of the machine working things out myself and after trying some dip switches on the back and scanning around other various things in search of the answer I thought I’d change the switch near the coin slot a try. Switched it up to “tokens” from the “all cash” setting. This has worked and it’s now the £6 jackpot I was after that I used to play many moons ago. I’ve been giving the machine a good clean out too, buttons out and cleaned and changed all of the faulty bulbs so it’s all working apart from the sound which is gone but that doesn’t bother me too much.

Here it is folks, I hope you like it (Sorry it took so long) If there's any issues post them on this thread and I'll sort them out in the next few days. Once any mistakes are fixed I'll upload it to the other sites mentioned in the notes. Play in MFME v6.1 or higher. Works best on a nice big monitor Many thanks to - SteveP for his help with the starter layout and whatnot Road Runner for the ROMs Wizard for his continued hard work on MFME. These days are truly something to behold and I cannot thank him enough Cheers, Steve Step & Skip 1.0.zip

excellent news! it sounds like a great place!

oh yes of course! just making use of some time! fault was TR104 short on the lamp data side causing this trouble!

I have cobbled this Scorpion 2 board onto the lamp test on the Scorpion 4 test rig, It works! but does show up a stuck row 6 lamp data transistor! this is probably why the board was removed in the first place before the rot took hold! but it does show the importance of the test rig being able to test ALL the outputs, well on the lamps at this stage in the process so far!

Well done glad its sorted