Leaderboard

How much are they a quidditch?

I think the 4mil price tag is a bit high .more like 1.5 -2 I'd say .hes definitely not leaving the machines there that's for sure .but what a brilliant basement arcade that makes .I remember walking down the steps for the first time into the basement about 9 yrs ago and being blown away by how good it was and how i remembered arcades use to be .

I am hoping to have some working impact R processor's by the end of the month. Feel free to message me on here I will try to check my message more often

Here is a little video of the classic i made of this a few years ago.

is that harrys brother ?

A friend called Matthew Potter is making a batch of Impact R's up.

The house cant be selling so its another marketing strategy to get views Ive been a few times too and reckon its way overpriced for where it is Been watching fantasy homes by the sea and there are loads of houses as big if not bigger for less than that 😉 Maybe he needs to get Jenny Faulkener to show folks around

Well me and Nick went halves for the file to be created and that was done by an arcade art guy in Holland and that cost 50 euros. He fell by the wayside when it came to matching and printing! A guy in the UK is doing the printing expected turnaround a week

Well it's been done on the file size and that's 100cm by 196cm that will hopefully do one side inside and out so I have 2 full pieces and an extra bit to cover the new lower back panel, any other swollen bit's I will make from the old sides

Near enough to help me out, thank you that's decnt of you 🙂

Been a while! But we are at last getting this printed! A match was done for colour. And the final match as it will be printed

Had the reel deck out and stripped it down cleaned, soaked the clutches stripped clened and greased the motor, now all working as I remeber it. Had the 10 slider out and cleaned that up, it's much better but still the odd time on a 10p win will just buzz, the 10p relay looks clean on the contacts too.

Did you ever get the location of the machines out of her before burying her?

Found this interesting article on Project Coin. First it celebrates 10000th Seven Heaven off the production line but not for sale as they were to put it into an already established machine museum in their London factory. This does not say the end of production of this machine so can only guess what the final total was. How many left of those 10000+ machines, Does that museum still exist ?

JPM System 5 Yamaha Sampled Sound MPU: My machine is from the Dutch export market, but I reckon it is the same:

Actually, No! Some techs are just shit. System 80 (horrible nasty JPM tech where just about everything including board interconnects fail), Epoch (just plain grim), MPU3 (plagued by transistor faults), System 83 and 85 (terrible connectors) almost every JPM power supply ever made is overly complex and prone to failure. M1A( you need a degree in electronics to repair. Proconn is a nightmare to keep running. MMM isn't much better. SRU is good, ACE System 1 is good, MPU4 is good as long as the battery is removed. Impact isn't too bad, again as long as the processor card is saved from the battery. The list goes on and on. The bottom line is, most of this stuff should have long been retired and we just keep trying to make it work. I guess that's the fun of it?

Lucky b*****d what a dream room I used to have a room with 16 machines all 80s machines and all ex demo so like new till my ex wife nicked them all and ran when I was away along with everything else I had 😔