Jump to content

Leaderboard

    [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Popular Content

Showing content with the highest reputation on 10/14/20 in all areas

  1. Picked this up as completely non-working. Following a message from MidiBob (absolute legend, thank you) I went back to basics. I checked the molex connector on the PSU and found that there was 0v where there should have been 12v. Swapped over to my spare and that gave me the required voltage. Plugged everything into the MOBO, switched on - nothing!! Checked for the 12v to the resistor, nothing!! Swapped over to my spare board (working last time it was in a machine), switched on - nothing!! Checked for the 12v to the resistor - nothing!! Rechecked molex connector and 12v where it should be. Checked at the input pin on the mobo - nothing!! Took off the power loom and checked for continuity, wafer connector pin 2 bad connection. Worked when I moved it to a certain position the went open circuit when I let go of it. Connected all up and wedged the pin 2 with a match, switched on and booted!! I'm going to have to play it properly this weekend as the original board was Rev 4 and my spare is Rev 7 so need to see what problems it will cause. Really happy to have saved it from being broken up, it will be joining the rest of the family this weekend and vid will follow once it's in place. Hyperdeal.MP4
    4 points
  2. Managed to aquire this today another system 5 off the missing list happy days. Once I've picked it up I'll upload the roms for emulation cheers Tony
    4 points
  3. 1 point
  4. Not a conversion, then? I'm impressed. Should be possible to get it back onto original coinage. I wonder how far Cambourne is from Co. Durham?
    1 point
  5. The original and best version...the mpu3.
    1 point
  6. Harrier electro from Bell Fruit. Originally released as Jump Jet on 50p tokens, this is the £1 upgrade but still same game. Holds but Not so much a nudge as a jump feature. Nudges move one symbol at a time. When the jump panel lights the player has a short time to match the symbol on the centre reel win line by pressing the First and third reel hold buttons this will lift the corresponding reel solenoid allowing the reel to spin, release button to stop reel so as instruction on panel advises short spins give better control. If winning symbols matched then that win pays out. This is another sort after electro as low in numbers compared to other BF electro's.......
    1 point
×
×
  • Create New...