Leaderboard

Made in 1950 and it’s still working well!! It still picks up smooth radio on medium wave!! 🤣

Hi is this a rio video cabinet if it is and it is displaying that on the screen normally it's the pc not booting up there's a small red button on the pc were all the leads go if this not lit then it won't boot up press and hold the button this will boot up the pc and game should start the main cause is a flat battery in the pc so auto boot up the battery can be changed unfortunately the cmos needs an access code to allow you to reset the auto boot and barcrest at the time wouldn't give out this info this might be no help but working on theses for many years it was a common prob on older units

And another book!!

As Bob said i would start with the 2 pots, then check the 4 bridge diodes as these can go open circuit.

Looks like a start point the basic code is in this machine . Might be worth a contact. link to a basic pi slot https://youtu.be/jMZp--WsQKE Pi talks to coinmech

Have this - prob £1 but never got it to boot (not sure what devices are without scraping labels - don't feel like they have a window) - suspect at least one has gone bad but perhaps JP code is written on only one ROM?

Sorry, I can't remember if the yellow label is the switch mode or the linear one. It's probably the linear in which case it could be a number of things. First thing to check is the two 1K pots as they tend to go open circuit. Then the regulator chip LM723. You may find all the small electrolytics have dried up too. There could be a myriad of other reasons but you'd need to do some fault finding first to localise.

I use these folks for new 10p and token tubes ..they also do some nice tinted ones https://www.ebay.co.uk/itm/TINTED-ACRYLIC-TRANSLUCENT-PERSPEX-TUBE-RED-GREEN-BLUE-YELLOW-PURPLE-AMBER/312568437174?hash=item48c687d9b6:g:JmsAAOxySE9Q6~0G

A seek peek of what I may be getting tommorow (all being well)