Leaderboard

For all you elec-mec fans Here is my Bell Fruit Ten Up Eventually being happy lol

OOPS! Probably best not to use torch bulbs, then. RS has 'em.

Those 4.8v bulbs are actually 48volts as Ten Up uses a mixture of both those and 6.3v The 48v or 50v as that is the supply to them were an experiment by BF that was only used in a couple of models in the start and hold bulbs before going back to all 6.3v

Evening all, I stumbled across a lead from an closed down arcade these are just a few pictures from this evening..

Time for those Crazy Fruits again, this is actually the 3rd time i've made the £25 version (also did a £5 & £10 1024dx). The first time i made it squashed, 2nd time a mini 1024dx now its a bigger clearer version Thanks goto @Simon Sevens for images from the real machine via the mecca @Player for reel symbol images from the streak upload and to whoever made the original, original 1280 version from years back Usual shortcuts apply, Play in mfme v20.1 Enjoy and Happy Gaming!!! Stay Safe, Stay In, Play FME!!! Casino Crazy Fruits Red £25 DXv1.01.zip

Welcome! as error codes go that's given you a big clue what the problem is. Perhaps start with that?

9 mins of my life well spent, move over Project with your invisible hold Bell Fruit beat you to it when you was just an egg. A beauty Chris and thanks for such a brilliant video😊

Hopefully have my Plus Ten working soon Chris. Just getting everything ready for the clean and build. New bulbs, washers, powder coated bits etc. looking forward to hearing the bell as it lands on a plus ten.

https://uk.rs-online.com/web/p/incandescent-light-bulbs/2212328/

Hi, by the way, the M1A board works in a HoleInOne machine, similar to IceCold Beer. Not often to find.

Hello, great. Thats exactly what I am looking for. Backtracking is a very hard job. Hope to get my M1A running. Thanks Thanks Thanks 1..1000

Hi papapopop Hopfully is is what you are after?.

I could not find the screw in type when needed them and actually had a few 60v bayonet so changed the holders to fit them and worked no problem. these available now, try this one is better.. https://www.ebay.co.uk/itm/MES-Miniature-Edison-Screw-Bulb-10mm-E10-6v-12v-50v-60v/254563710534?ssPageName=STRK%3AMEBIDX%3AIT&var=554279335877&_trksid=p2060353.m1438.l2649

The videos are still there, they have been stood for maybe 20 years, with mould on the bases,, I have all on with trying to repair an old machine,, so I haven’t got a clue regarding video machines,, I could make a call if anything took your fancy got to be quick tho,, every bugger is going tmoro , to pick over what’s left,,

The 6.3 volt bulb is 0.3 watts, not 3 watts. It's a radio dial lamp originally. 4.8 volts is the rating for a 4-cell electric torch, to allow for the flattening of the battery. Volts (V) times Amps (A) equals Watts (W), which is useful to know.

you could try 6v 200ma, cheap enough at RS https://uk.rs-online.com/web/p/incandescent-light-bulbs/1715949/

have you considered donating to the mecca and contributing with posts so you get access to the resources section of this forum might be something in there to help you or hang about and wait for someone to help you if they can

It might be better if genuine collectors just kept their heads down. The only time we even hear about the GC is when a busybody on eBay starts shouting 'You need a licence! You need a licence!'.

Been busy tonight trying to get my Chance Unlimited back working again. Initially I thought it was an mpu3 board fault. I swapped out the board for my only spare and still no joy. Doing nowhere but humming! (Probably because it doesn't know the words 😂🤣😅) So I have borrowed the board put of my Fortune Numbers. Anyway,onward and forward,I checked all the plug connections going over the pins and spraying contact cleaner into each plug......Still nothing! Then it was a check of the 3 fuses with the multi-meter. All checked out fine there. So,onto the fuse holders which looked fine tbh. The top fuse for the boot up seemed a touch loose,so I replaced that,and switched it on and hey presto...life! As I wheeled it into position,I noticed none of the lamps were on? So I replaced the 34v fuse holder which did the trick. I'm hoping the original board wasn't faulty at all,as I borrowed the board out of my Fortune Numbers lol. So here is a decent length video of her in action for you all.

Here is Spotlight mpu2 being generous for a change

Some mpu3 action now Starring Super Exchanges Unlimited.

Its been a while,so here is a JPM Double Top vid for you all now. Featuring a mention to Silver Ghost. Hope you enjoy watching.

Lets play...Adders & Ladders! Original and best version mpu3.