Leaderboard

Had an audio card in to repair and one of the problems was the O/P chip had been bent too and fro so many times and what with the rust on the pins it had started to come adrift. These devices LM2877P are unobtainable, at least at a sensible price so I had to see if I could salvage the chip. Once removed from the board it only had about 3 legs left and these were hanging on for dear life. In the end I tried this and it seems to be absolutely fine.... The short pins were cleaned and then soldered into the strip. A steady hand and a needle iron tip were needed. It now works a treat so let's hope it continues to do so.

I'll knock one up for you and stick it in the post.

Got all your details. After all the favours you've done me it's the least I can do.👍

Check speaker is plugged in both ends (MPU is top right). Open doors turn refill key and check volume is turned up.

its one of them, you need to go in person, show them, what they will do is add it onto a paying customers job, incorporate your stuff and take a back hander from you i have my monkey bike done this way and a few other bits over the years i am sure youll find someone a fella i watch on youtube called martin bulter (retro restore , retrohax and butlers empire) powder coats at home using something called electrostatic magic all you need is compressed air, the gun with powder and a oven .. anythings possible these days good luck fella let us know how you get on

Won't happen, he has gone awol, should be back by Xmas hopefully.

That’s right I remember you went down the stairs and they had lots of pinballs and pool tables and a juke box.There used to be a lot of mods that used to hang around in there, as to the shooting gallery I have no idea what happened to it.

Great thanks mate 👍

Here is my Wheel of Fortune by VFS Great sounds,and gameplay on this.

New in today at chris217 amusements lol. Bought this about a year ago and was in dire need of a restoration as it was in a poor state tbh,but it was worth saving for what we see today. Massive thanks to the legendary sulzerned who was desperate to get his hands on this hehe😂😂😂 He's done an amazing job on this. At first arrival,it seemed to have a reset issue which we both agreed it was a flo-tube issue....so I removed the starter and it played for quite a long time without fault. It may have just been cold tbh,but we'll see how things progress. Here's a 17min video for you all which includes some jackpots. Lovely system 80 machine from 1984

Nowhere to put it mate but do hope it finds a good home and a place in FME history.

I doubt Jimmy had 2 Rat Races, think the sale was more of an advertising campaign.

Well I made my own fuse map when I made the system 80 boards so jpm could not say I had copied there chip and infringed their copyrights! So my chip works perfectly but has a different fuse map to jpm!