Leaderboard

Heres a wdx of jpm's snakes and ladders with a £15 jackpot at 25p play,this is yet again another update as the art was awfull on the other dx i did.Theres two dx's here one with the side art lamped and one without so you choose which you want to play on.Massive thanks to booze.net for all the photo's he took for me to stitch the base art up,Also to the maker of the vogue cab. This at the moment is playing ok and suprisingly better than when it's set to £10.Can't find any errors with it so it can go hope you like it :jp Oh and this one doesnt give game over when you land on lose with the antidote Snakes&ladders wdx.zip

get the clubber scrapped much better use of the cab . lop top off .. refix job done

Yup, the switch that was doing strange things when just wiggling the connectors attached to it was all broken up inside (I pried it apart to see). From my pinball bits and pieces I found an old one that fits although it's also a bit knackered. Good news is that sorted out the problem, so the reel all now spin as they should and don't jump at all after they stop. It was a switch on the gamble unit which has also fixed the problem of the double/lose feature not working properly. I've also ordered 10 new switches (think I got the right ones) in case I find any others that are broken. For the bulbs which aren't working, it's generally because they're missing, fortunately 6v AC is what pinball machines use so I've plenty of spares. Things still to sort out : The 'no change' light doesn't come on, think that's a bad switch on the 10p coin tube When you put in 10p for 2 plays, the 2 play light doesn't come on. The double/lose gamble feature doesn't always seem to flash the lights by the buttons, even though the feature is running. Reel strips need lining up a little, they've slipped a little over the years (my Bally machines used to have that too) Thinking about replacing the fluorescent tubes with LED, that way no need for any mains voltage in the cabinet. Less need to worry about where your fingers are poking Coin mechs need some lubrication, as do the payout slides/solenoids. 10p coins also quite often miss the coin tube, needs a little tweaking. Reel mech could probably use some lubrication and some gentle cleaning of the payout wipers/contacts. The blue plastic coating on the frame that holds all the motors and relays is all flaking off. Might strip it and repaint if I can be bothered. Anyway, it's actually playable now so that's great.

Hope it hasn’t held you back in any way.

hello and welcome