Leaderboard
-
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
Popular Content
Showing content with the highest reputation on 06/24/21 in all areas
-
I use crushed walnut shells with a good squirt of a polish. It's usually cheaper to buy from a pet shop as it's often used on the bottom of reptile enclosures. For pinball parts things usually come up really well. For things that are really rusty, it should remove the rust and then a little work with a brillo pad should be good. Be interesting to see how these coin mech parts work out. I'll pop some pictures on here "post-tumbler" and "post-brillo"4 points
-
I had a pile of old shillings from previous machines, but no old 10p or 50p coins, so I bought a bunch on Ebay. They were pretty mucky, so I threw them into a tumbler I used for polishing/cleaning pinball parts. Came up really nice. Picked a couple of nasty parts from the coin mech and I've thrown them in, let's see how they come out.2 points
-
Press test button so reels spinning to position 1 on the win line. If it reel 1 alarms and the reel is not aligned you may have to re-aligne the motor. If all reels aligne on the test spin then I would suspect a faulty connection on the red and green leads or the opto lead. I regularly spray contact cleaner into all the leads that plug onto the Reel driver board and on both ends of the red and green leads.1 point
