Leaderboard

At JPM we once had a lorry turn up from Ireland that had delivered frozen goods to a local establishment and had been paid to pick up machines for the return journey. The lorries compressor unit was stuck on, so the the thing was like a huge fridge and the guys loading the lorry with sack trucks soon had coats on, although as the machine were in those huge plastic bags no one was unduly worried. Unfortunately the contraction coefficient of solder is much different to the relay base metal tags so the vast majority of them fell off and even those that didn't were suspect. The relay base has 11 soldered connections as I remember and the club machine had 20+ relays and there were 40 machines delivered. That's somewhere near 9,000 questionable connections! It took us days to solder the bloody things back on, but at least the Guinness and craic were good. Ha just remembered another funny incident. Martin Stork and I were in Ireland and we were working on a couple of machines, don't forget this is in the 80's. We were modifying product and terminating cables using 'bomb ends'. https://www.rivval.com/Product.aspx?p=RP00454/1 The look on peoples faces when I shouted to Martin to chuck me a couple of bombs!

Honestly can't remember, sorry! I know this is going to sound strange but I was never interested in the games themselves, just the figures they produced, the mechanisms within them and the design process.

This one had got little to do with machines, sorry but it's part of the history! 😉 As well as running the Customer Service team I was eventually asked to run the Spares Sales department which was recovering after an unsuccessful attempt at trying to stock other manufacturers spares for the industry, a sort of “Radio Spares” for the industry. This meant I had to get to grips with stock holdings, more budgets, stock takes and bin cards but while I was there though I became more aware of the Ferranti computer which was a dirty great Main Frame computer that ran the rest of the company and which we in Customer Service knew very little about. We had to put our figures in via data entry clerks specialists. Looking back now it seems farcical, but let’s not forget that at the time Fax hadn’t made its way to the office yet, we were still using telex and TNT had only just started delivering parcels! Jack wanted to bring the place up to date and install a much smaller but much more powerful machine from IBM but was concerned that the change over would be a bit of a nightmare. The decision was taken by the board that the trial would be made by installing a system 36 as a test bed, more for the company than for IBM obviously, and he decided that the trial would be under my wing. Bird ha ha! Spares Sales was chosen as it was the smaller of the stores and so I was banged off on a course in Bracknell where I was exposed to the programming language and the various process’s involved. When the trial was over I could start helping others understand when the larger system was installed. I think it was system 38? The installation went ahead and within a week we had our stock levels in and were running the two systems in tandem, the same numbers being entered into both machines by ourselves and the data entry clerks, these were then tallied against the stock at the end of each month. Problem was the figures never tallied. Try as we might we could not get our stock figures to match up with those that were in the main frame and this was a complete mystery. We had a consignment of stock delivered from the main stores, we stocked it, sold it, dispatched it and logged every single transaction. The ensuing figures were often way out for too many items to be comfortable, so exhibiting less trust than perhaps I should have, I worked for a month with the team watching as many transactions as I could and cross checking data entries. After a long period of head scratching and considering all the variables we eventually came to the simple conclusion that the only figure over which we had no control was the item count of the incoming goods. So when the next delivery came from the main stores I took the film wrapped cases, opened them and counted them in rather than taking the quantity on face value. Many of them were wrong! The clouds cleared. Light Bulb moment! For my incoming stock to be wrong the main stores levels should in reality also be similarly incorrect? As some quantities were actually greater than they should have been that would mean that the corresponding items in the main stores should have been short? Yet their figures and stock levels were constantly correct so throwing bad light on our efforts and therefore reinforcing the effort to keep the Ferranti and the status quo. It was obvious to me that they were passing stock errors, shortages, and who knows what else, on to us and then casting aspersions our way, but who to tell? I decided that the only person to tell was Jack Jones as I didn’t know who to trust, that sounds a little conspiratorial but in truth there was a managerial clique, as there often is in business, and as the Customer’s representative I found I quite often didn’t fit, but then you knew that already? My goals were a little different to theirs although they should have been the same. I called Jack over and prayed that the items we were about to open would give credence to my claims. A pack of expensive TMS 9980 Micro Processors straight from the stores were first opened, we checked the quantity against the stock sheet we had been given, it was short. Eproms, worth a few quid each, 40 too many, transistors at pennies each, hundreds too many and so it went on. The only thing to do now was to wait for the next stock check in the main stores which came in and was apparently correct. Even with the irregularities in our transfers, really? After a few weeks the obvious and very visible shortages in the stores were several of the stores staff and a data entry clerk who also failed to make an appearance. Quite what was happening I never found out, but the Ferranti was changed and the System 38 was put in. On another point, having had experience of the IBM and the Ferranti and being exposed to personal computers, I began to consider the common ground between them. But this was not my ‘job’ it was just an interest, and currently my ‘job’ was Customer Service and Spares Sales. But not for much longer……..

Hey Everyone, My name is Simon, AKA MR No Stripe. In my spare time, I cosplay as a Star Wars Stormtrooper to raise funds for Cancer based charities. Just found this awesome site, after acquiring my first Barcrest machine and looking for help and information. I hope to be able to share my journey in restoring my Star Wars Death Star Assault machine. Mr No Stripe

Think 8 bit should work.

There’s a video on YouTube showing how to etc google search https://www.google.co.uk/search?q=scorpion5+fruit+machine+test+mode&ie=UTF-8&oe=UTF-8&hl=en-gb&client=safari

It might be you hold test then press top up. Depending on the machine under the reels can be a hidden test switch. One thing to note is you have a micro switch that detects if the lock is open or not. This needs to be open as well. Some people wire this shut so you don’t get the door open alarm im sure as well when it says read meters you press cancel before going into test. Been a while since I’ve worked on one and when I do I’m the same where it’s trail and error getting it in test

Arrived today. Best be good @MattyLor else 😂😂 You even get wanky lead free solder 😧

1980-82? After Sales was a great place to work and was somewhere that I found I really had a penchant for, and really enjoyed. I mean people had problems. You fixed them cause you could. They were happy, your employer was happy, what was there not to like. Well for a start several of the 'old school’ team. Although they were in their positions they did not do the job properly, as I saw it, and I worked hard at doing the job right. As I have said I was eventually given the job of After Sales Manager so I guess I was right? I mean as a lowly engineer rep I was given 3 patches, North of Hadrian’s Wall, South of the M4 and anything to the right of Cambridge. This meant that all the large city centres with their easily available night life attractions were retained by my superiors! Let’s not go there! My main team consisted of Anne Marie O Sullivan, Julia Lockwood, Martyn Stork, Hugh Thomas, Russell Grimble, David Mead, then later Steve Bryant, Simon McCarthy and Adrian Davies. Although others joined us it was us that kicked off my new “Customer Service” department. I didn’t like the handle ‘After Sales’, it smacked more of the ‘companies toilet paper’ rather than an aide to the customer which is how I saw it As I figured it we were there to represent the customer during and After Sales, and in fact if we could get to them Pre sales we might persuade them to be a customer by explaining the finer points of the product!’ At that time we were still preparing service manuals the old fashioned way and when I use the term ‘cut and paste’, I literally mean it. Cutting sections from an old printed manual and pasting them onto a new sheet that had the new bits already typed in but with spaces for the old text. This was then set off to be reproduced by some witchcraft of which I knew very little but I think it involved photography of some description! Plus of course the Technical Service Bulletins or TSB’s had to be produced when we had an issue or wanted Customers to know about information like conversion kits and law changes or other important information. Addressing envelopes individually from address books was daunting and although we did look at memory golf ball typewriters, I got to hear of the new personal computers that were becoming available so I approached Jack and he agreed to at least listen to my suggestions and so off I went. I spoke to Dave Young who had his own Marketing company and spent a great deal of time with us and who I had a hell of a lot of time for and in fact became a friend and another mentor. Dave was the ‘T shirt’ guru by the way, it was he that suggested we should include them in the cash box for that period! He put me in touch with a fledgling company in Swansea where I went to see the machinery that I had only heard of, bearing in mind this was pre 1980. The machine was an 8080, CPM based, twin 8.5” 128k floppy disk system with a golf ball printer and monitor. The metal box itself, yes the huge blue powder coated steel box was about 600mm x 600mm by 350mm high or about as big as a small kitchen wall unit. It ran Wordstar and Supercalc (like we knew what the hell a spread sheet was!) but Anne Marie and Julia and I stuck to it and we were soon getting things done so much quicker. Anyway given today’s knowledge you will know that cut and paste is a completely different issue Ctrl C - Ctrl V, no mouse! Mail shots were now the push of a button (well several combinations of buttons actually). Friday afternoon’s were taken up creating backups from the master disk to back up discs. PIP A:=B:*.* (god where did that come from) Then on the screen TRWV. TRWV TRWV (Track Read Write Verify) And so on for ages….and ages. Customers address’s were stored and easily reproduced on adhesive backed labels to be stuck on envelopes which became superseded eventually by fan fold envelopes no less. These were shot out and were stuffed with ‘personalised’ mails by the team in periods of fraternal and frantic office origami, not just the secretarial staff. Engineers were expected to join in but then the girls helped with unpacking returns and occasional de-soldering and checking test routines prepared by the engineers. One big happy team multi functional team. So successful was the introduction of the machine that other departments became interested, especially as we had soon invested in an MPM or multi user system. This allowed the guys to have terminals and access manuals and low level, Technical tip ‘batch files’ that I created for them to look at. The JPM Sales administration team and the R+D specification team soon had their own MPM machines and I was seconded to Sales for a few months to learn relational Data base structures to create Invoices etc for the Sales department. This was no doubt as Anne Marie had left Customer Service for Sales and taken our forward thinking ethos with her, but thank God I still had Julia. To be continued......

I have to agree with BF74 and point out that we often had to change pay-out structures during mid production run as it were. Glasses and perhaps bands were ordered and heads were banged on tables trying to figure out how was the easiest way to accommodate the new pay-out not only artwork etc but for the engineer on site. In this instance the little grey cells of BF74 were spot on and the 5 pulse cam was used to drop 2x10 coins, which was never truly optimal as if the switch dwell was slightly too small ( the dwell was what we called the width of the cut out in the cam ) if it were too small the slide would snap back, return too quickly and then clobber a token making it stick in the jaws. By the way Riche100 was kind enough to supply me with a WINNER schematic which I had been after for years and there on the bottom and due to a law change was a new pay-out relay and associated circuit on the schematic, with my handwriting! Now prized possession and framed on the wall !

An interesting point of which only the present or new owner will be able to accurately answer and possibly the reason the machine has been spared of being converted to all cash. As it was originally manufacture as a 50p token max payout machine, JPM will have fitted only a 5 pulse payout cam as it pays 10p tokens as well as 10p cash. For this later £1 token model it would need a 10 pulse cam OR the easy option was to fit a 2x10p token payslide which is my thoughts. If this is the setting then the same original 5 pulse cam could be left as is and for the £1 tokens 5 pulses of a 2x token slide is all that's needed. As the 10p slide is only a single 1x 10p slide, wiring the token payout slide over to the cash payout slide is not an option and the £1 would only payout 50p cash. Just dragged my Housey Housey schematic out to see which version it is and it's the modified £1 drawing so, I can confirm it is indeed fitted with a 2x 10p token payslide.