Leaderboard

From Customer Services, back to Development 1982 (ish) The 'Machine’ Development Department was falling apart at the seams. It wasn’t producing prototype product on time, BOM’s were badly prepared and priced, wiring diagrams were erroneously designed and Prototypes were poorly prepared. This was thanks in no small part to the Toss pots that any of you that have read my previous posts will have recognised. I was asked to leave Customer Services and take it on. It took some thinking about because I had never been trained to be honest, it all came naturally, but leading a new crew in disciplines I wasn’t too sure of? I thought long and hard and decided to give it a go. Just to add here that I left the Customer Service Team in the capable hands of Martyn Stork who worked with me for many years and of course ably assisted by the other colleagues, Huw, Russel, Steve, David, Adrian and of course Julia. First day I brought everyone in and we had a long chat about what was going wrong and what they thought about the problems. Basically they were being treated like idiots by the morons that were now gone. They were not respected, they were being told exactly what to do without any chance of input and they felt like they had no respect in the company like for instance they pointed out, the Customer Service guys (sic). They were constantly told to sweep any problems they had under the carpet. So in a bid to try to raise moral I bought everyone (and me) white coats, we all had ID badges, installed push button access pads with "Authorised personnel only" above the doors. There was a secondary and far more important reason for the latter but I will come back to that later. I started two systems of appraisal, I appraised them and (and this is unusual) they were asked to appraise me, and they were commanded to attend exhibitions. It wasn’t a magic transformation, it took time, but heads were held high(er) and more pride was taken in the work. Things changed. One thing didn’t, my hatred of the huge IBM main frame machine, well not exactly the machine but all that it meant in terms of waiting for the Data guys to prepare reports and input data and Jaisus H christ. (apologies) We would prepare the BOM’s from an available (previous machine) parts list (IBM output, wait). We would then have to ask for that parts list to be copied and have new part numbers input and costed (wait) and of course some parts deleted in the new machine listing, then after they were put back in we would have to wait for a costed BOM to be created or printed (wait) so we could let Jack know how much the new machine was going to cost. So sod that, I persuaded my new boss, Alan Parker (yes the P in JPM) to buy an actual IBM PC, which were by now coming on stream and so we had this new machine delivered with a hard disk! My god 10MB hard disk, we were never going to fill that. Anyway. We bought the new Lotus 123 package and as I had some (limited) experience with spreadsheets we started to make our own BOMs from the system by copying the numbers from the screen on the System 38 terminal that we had into the system. Oh explanation, the IBM PC had the ability to interface with and display, not record, information data from the IBM main frame. This is when I realised that a guy that had been working with us, John Lockwood yes Julia’s brother no less, was taking to this new machine technology like a duck to water. Trouble is he was a little, lets say, wild. All he wanted to do as I remember was go off to Teneriffe and get drunk and shag anything that stood still long enough No one had any time for him but I gave him some brotherly words of advice and tried to point him in the right direction. We enlisted the aid of another guy who described to us some (illicit?) software from the states called SideKick, that allowed us to grab the screen ram contents while were in the IBM’s ‘terminal’ mode and dump them into the PC’s hard disk as a comma delimited file. Like I knew what any of that meant! We bought and installed it and by doing so we could load the data into a spreadsheet, select the parts we needed and prepare ‘live’ BOM’s that were costed at that days buying cost, something we would have to wait days for. It’s hard to comprehend these days, given the distance we have come, but back then the systems guys were hugely protective and, it must be said overly busy, or was it the other way around? The machines were comprehensively labour intensive and of course the GUI was yet to be introduced and many things were command line driven and of course no mouse! I remember the first mouse manual. Honest! Around 10 pages. Anyway, I got called into a meeting in Jack’s office to explain how I was once again bucking the system, and of course the hugely expensive IBM monolith. I seem to remember his wry smile and the shaking of the head as he stood and defended me in front of the Irate Data Team manager. The days of the IBM were numbered thanks in no small way to me, Johnny Lockwood and the other nerd who’s name I cannot for the life of me remember! John went on to become a leading Computer Specialist with a national multi branch company. Good man. One other humorous departure. I asked a colleague to bring me some striped wire as I was helping with a wiring task due to an urgent preparation, cant remember what for! I said bring me some brown-red cable and some brown-orange (colours may be wrong by the way) He brought me some Red yellow and Red-green. I obviously said "don’t be a dick" and with that he looked at me strangely and asked what was wrong? He had been taken on as a junior in the department and was colour blind! You couldn’t make it up! The reason I know it was 1982 is that it was my 30th birthday while I was in Development and I walked in to a clean desk (not my way at all), a bottle of Jameson's Whiskey and a glass. The day went down from there but that's a whole different type of story and doesn't belong here!

Merry Xmas to you guys and thanks for the continued supporting comments. Still got GUAB and Astra games to go, oh and Coinmaster and Gamesoft.

I’ve got one of these Chris, it’s an okay machine, but will look good in your collection 👌👌

Thanks for the info wearecity

another fantastic instalment thank you frank a very merry christmas to you and a big thank you

Having worked in the service side of the industry most of my life, It's great to read especially from one of the major manufacturers side Frank.👍

A great read, please keep them coming.

There was one of these on eBay yesterday

Good to know fella

It hasn’t been released yet. I’m still doing finishing touches to it when I get chance. I’m hoping to release at least by year end, just not been that active on it. I did release an enhanced classic version last year, that is available over at Desert Island Fruits. J