Jump to content

Leaderboard

    [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Popular Content

Showing content with the highest reputation on 01/19/22 in all areas

  1. Tilly1
    Here’s a few photos of her all finished , I will try and do a couple of decent videos over the next couple of evenings and put them up for anyone interested in watching with some BIG THANK YOU’S to everyone that has helped and offered to help me with this project cheers 🍻
    3 points
  2. martinb
    top glass in 🙂 got to wait for warm white LED's for the illuminated bottom panel thought I'd try instead of the bulbs which dont illuminate it very well.... we shall see
    2 points
  3. sulzerned
    Great job dave and very pleasing to the eye to see the project finished.
    1 point
  4. MikeB
    You have done one hell of a job to that Dave, looks fantastic 👏 considering the bloody state it was in when you collected it in April 👌
    1 point
  5. Dotteddown
    Superb! looks fantastic 👌🏻
    1 point
  6. martinb
    You may be right, will share results and can always revert back to bulbs mask will be the same 👍
    1 point
  7. Prototype_uk
    Sorry just noticed the postage cost on that eBay page 🤑
    1 point
  8. Prototype_uk
    What about Rosewood? You can buy the veneer here. https://www.ebay.co.uk/itm/Santos-Rosewood-Veneer-SaRaiFo-250x21cm-1-Sheet-/392576710015?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338268676&toolid=10044&customid=Cj0KCQiAip-PBhDVARIsAPP2xc0CzEzISyY_EZiN795QbuOgnkAxbe__JaOEbx4iYfU8zKRoe5aErqoaAkWlEALw_wcB
    1 point
  9. Prototype_uk
    Old Junk, some people eh? You might have flicker trouble with the LED's and need to add some smoothing capacitors.
    1 point
  10. Player
    You can adjust the height by removing the bar and using different holes making it higher. No need for washers (unless i'm wrong of course :))
    1 point
  11. MikeB
    A cab is possible to make, it takes time and patience, I did one for my line up a few years ago, and a couple of others on here have been very successful making their own. But obviously a swap out would be easier, but try finding one! The machine needs to be saved though 👍
    1 point
×
×
  • Create New...