Leaderboard

The roms will be of LAN. Just re-packaged glasses lol

Evening Dave, they look good together 👌and no problem letting you have it, you did it proud! The broken wire is a very distinct possibility, the line up you had and this supertubes were from the same place and had both been in equally bad state, that is a good place to start as the plugs were solid on the pins when I removed them, with corrosion! I will start looking further into this.

And as to the problem's with the buttons not working it sounds familiar with what I had with line up where the green (corrosion)traveled up the wire making it brittle and had snapped under the pvc coating not far from the mpu plug on the board might be worth a look mate

Hi Mike these two beauty’s next to one another I still can’t thank you enough for line up mate 😁and here’s a picture of the dips on my super tubes I hope that helps 👍if I can help in any way mate give me a shout

There are no schematics for the PSU I know of. The best approach is to try another PSU. Going by feelings and 'looks OK' is a recipe for disappointment on Epoch. The battery is flywired but it doesn't mean there aren't any issues with the mpu. Battery damage can be old and microscopic. It's good practice to have spares of everything on Epoch.

This might help Mike there is one on eBay and I can read this if I zoom in!

Two years on, and I am back on Supertubes! 😂😂 Like all of us I have been super busy. I have the machine up and running but with an awful lot of problems, I suspect mainly down to wiring. Does anyone have a Supertubes manual please they wouldn’t mind uploading, I have been through the documents and can’t find one, also does anyone have an image of the dip settings also. Mainly the machine is working but a couple of switches are not, cancel and hold etc. Many thanks in advance as always. Mike

That is a right result Ronnie, nice one!