Leaderboard

3D printed parts to share Here is a copy of my lamp mask design that comes in for parts to be printed on a standard size 3D printer and glued together. It's designed to be printed upside down with the holes for the lamps flat on the bed of the printer. On the top and bottom sections drill the print on the angled sides to put the lamps where you want. I also include the bracket for the credit display and also the bracket for the upper florescent tubes. In both cases, drill the print and screw to the cabinet with self tapping screws. These brackets are designed to work with my glass design but should work well with the stock Line Up glass. Line Up - Tube and Credit Brackets.zip Line Up - Lamp Mask 3D Print.zip

definitely repairable, The sensor fails with age, sometimes when they warm up they work, but yes bits are easily available... well they were when I did them, I did a thread on here about them years ago

Not repairable, who told you that? I've done loads.

ive got a few sys100 manuals . sorry i dont know if there are any differences between machines etc

I got some photo diodes from RS which worked fine. Like Andrew I can't remember the part numbers but they weren't anything special.

I have just looked and I cant find my post about them sorry, I must have deleted it when I deleted lot's. If I can find any info I will let you know, I am sure I bought some sensor parts but no idea where they are now or what part numbers they are. If I come across them I will let you know

Brilliant work 👏

Tube brackets and credit display I bought some T5 U clips form Amazon and screwed one pair to the lamp mask and then attached some more to the L brackets holding the tube behind the top display. https://www.amazon.co.uk/dp/B09XHVQWP1?psc=1&ref=ppx_yo2ov_dt_b_product_details I made a 3D printed bracket for the credit display and fixed in place. Final tough was to fit red film on the glass, for this I used some red transparent sticky back vinyl and filled two layers. https://www.ebay.co.uk/itm/222211460752 Still waiting for the coin display decal to be printed in matt vinyl.