Leaderboard

SPLC4 ROMs (someone will likely know if limited or not, if not simply the mysterious "45120" version you already have) unfortunately only have EPROMs (no files) at present - not something I've got involved with but have dug out and been looking at some equipment here did get first signs of life out of this old PP29 this week (found a transformer wire adrift & at least one cold joint on a pair of electrolytic smoothing caps) so with a little luck (if still fully functional) might be able to make copies and post to you if all else fails sometime in not-too-distant future (will prob need to invest in a UV eraser to wipe some spare EPROMs when funds allow, unless some already blank)

3D printed parts to share Here is a copy of my lamp mask design that comes in for parts to be printed on a standard size 3D printer and glued together. It's designed to be printed upside down with the holes for the lamps flat on the bed of the printer. On the top and bottom sections drill the print on the angled sides to put the lamps where you want. I also include the bracket for the credit display and also the bracket for the upper florescent tubes. In both cases, drill the print and screw to the cabinet with self tapping screws. These brackets are designed to work with my glass design but should work well with the stock Line Up glass. Line Up - Tube and Credit Brackets.zip Line Up - Lamp Mask 3D Print.zip

Also to those that want Chloe's Classix it is here on our site; https://www.freedomfruits.net/showthread.php?tid=412 There is also a happy file for it there too to those that have joined. Hope you all had a great Halloween. Hawaiian. P.s. with thanks to Dave (Mr P junior) for the final piece of the puzzle.