Leaderboard

I have sent you two sensors 😄

Upload the roms to here too please as for images can you take with machine off and no reflections (ie windows etc) take a couple of the full cab in view then a couple of the bottom section (reels and base glass) and some of the top feature glass section, these need to be as hi res as possible for the higher res dx finally the reel bands can you take some of all symbols especially the numbered ones on the fruits and jackpot symbol and the hi lo number reel you might be able to get them all In View under one or two images thanks for offering these resources regard v666

Hi All, I have an old Maygay Fruit n Nudge £250 Jackpot club machine that had died on me, I will be scrapping it soon and wondered if anyone would like the roms to dump (if they haven't been already), also if anyone would like to do a dx layout i could take pictures and send them etc.... Cheers.

Innfection - i will take a some snaps of the machine turned off - as it won't turn on !! you might have to stich them together with photoshop for the best results tho.. I will post them here when i have done them. Clo06 - if you send me a private pm with an address I will send you all the roms.

https://www.fruitemu.co.uk/ib/topic/23593-mpu4-m607-chr-needed/

3D printed parts to share Here is a copy of my lamp mask design that comes in for parts to be printed on a standard size 3D printer and glued together. It's designed to be printed upside down with the holes for the lamps flat on the bed of the printer. On the top and bottom sections drill the print on the angled sides to put the lamps where you want. I also include the bracket for the credit display and also the bracket for the upper florescent tubes. In both cases, drill the print and screw to the cabinet with self tapping screws. These brackets are designed to work with my glass design but should work well with the stock Line Up glass. Line Up - Tube and Credit Brackets.zip Line Up - Lamp Mask 3D Print.zip

Token conversion While the glass is away being printed and I am waiting for the reel bands / barcrest coin decals to arrive, I decided to to carry on with a couple of other tasks. I have printed a set of temporary reel bands on A4 and taped the 3 sections together. They are not perfect but good enough to test with for the time being. Next is to adjust the coin mech to accept a 10p token instead of the 2p. This is done by adjusting the coin diameter screws and moving the bar upwards to allow the larger coin to pass through. I ordered a replacement coin tube for the tokens. I bought a 35mm OD and 29mm ID x 400mm Perspex acrylic clear tube from eBay. I then swapped over the coin solenoid for a slightly larger blue 10p version from a spare I had. I’ve linked out the coin level sensors for the time being. Then a quick test to make sure the token payout works.