Jump to content

Leaderboard

    [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Popular Content

Showing content with the highest reputation on 11/16/24 in all areas

  1. midibob
    OK, then next thing would probably be the sensor inputs. Check out the inputs to IC5 pins 10 - 14. I think they should be HIGH until the lamp hits the sensor when they should go LOW. Reel B should be pin 4 on the green plug which is pin 11 (PB1) on IC5.
    1 point
  2. Andrew96_
    All the different vector layers needed for just that! This took me weeks!!!! and of course s much better than the .jpg screenshots below I redrew everything as per the original. original scan was a proper professional colour matched scanner as I wanted the colours to be identical As for fruit machines, was very pleased with this result using the same process
    1 point
  3. EddieC
    In the spirit of sharing, here is the Gerber file for the MPU3 program cards. Cheers Ed MPU3 V2.zip
    1 point
  4. EddieC
    Ordered the components kit, each board needs: 2 x 28pin wide sockets 1 x 4.7UF 25V tantalum bead 5mm 1 x 16 pin socket 1 x 20pin socket (if you want CHR chip) 1 x HD74LS138P IC Wire links Here are the boards assembled and tested with CHR less Super Line Up roms. After understanding the link settings, they all worked perfectly.
    1 point
×
×
  • Create New...