Search the Community
Showing results for tags 'Alarm'.
Found 5 results
-
Hi there. I have a mayday machine of pick your pasos. I was playing one day and I got jackpot but had less than 20 in the pot and the alarm sounded. I turned off and on again like many times before to reset the payout but it got stuck with the LD1 Flashing, LD3, LD4, LD5 and LD2 are solid and L6 is off. The battery was removed before leakage and was working fine in a home environment. I have a video of boot up to show what happens if that helps anyone. Thanks
-
Hi, A friend of mine bought 3 fruit machines Ambassador Gum, 3 with working bubblegum distributor, they where made for France or Belgium where money games are forbidden... Only one did turn on, the bassador 1000. The 3000 doesn't boot and the extra AG1000 will be the next project. Here's the restoration project for the Ambassador Gum 3000, MPU4 mod4. Following www.booze.net advices, thanks a million times Paul you convince me to do it, the battery has been removed, changed, and stuck outside the box. Mine had severe blue / greenish leakage damages from battery down to dataport. Audio amp, volume VR1 and neighbours look pretty bad.
-
Hi, I'm rebuilding 3x Ambassador Gum MPU4 victim of battery leakage. Vinegar bath, distilled water, new outboard battery,... The machine #2 itself is good and tested with a working mpu4. I'm working on MPU4 mod4 #1A : On start-up I have "AG3 0.2", the 4 wheels initialise but wheel C seems blocked, lights turn on and then "AL3" message is displayed and everything is blocked. The message error isn't in the error list, any idea ? Thanks Arno
-
Hi, I'm rebuilding 3x Ambassador Gum MPU4 victim of battery leakage. Vinegar bath, distilled water, new outboard battery,... The machine #1 itself is good and tested with a working mpu4. I'm working on MPU4 mod4 #1B : On start-up I have "AG3 0.2", the 4 wheels initialise, lights turn on and then "AGPR ERR" message is displayed and everything is blocked. I've tried different program module cartridges and always the same error. The message error isn't in the error list, any idea ? Thanks Arno
-
Can anyone help me?????. I have a barcrest club frenzy that is displaying alarm 54-11 cpu bus error pc2a7f6 1ddcoooo**** i have replaced the mpu, the reel driver and the power supply but no change. Any ideas???
