Search the Community
Showing results for tags 'Shoot MPU3'.
Found 1 result
-
Hello, I am new to this forum. I am 18 years old and live in The Netherlands. Since we went to the pinball hall of fame in Las Vegas me and my dad have a passion for pinball machines and arcade stuff. We have got 3 pinball machines, one arcade machine and a slot machine. Recently I bought 2 slot machines that weren't functioning for 20 euros. I thougt well maybe I can fix them. I have been reading your forums and it has been really helpfull. But now I am stuck at a point where I dont know what to do. It is a Barcrest machine. The name is 'Coin Shoot' and it has a MPU 3. This is what I did so far: When I plugged the power cord in only the TL lights turned on. No other lights or sound. Sometimes the display would show 00000000 but a lot of the times it would not show a thing. I could move the reels by my hand. I checked and replaced the fuses and I figured the MPU was broken. I took the MPU out and the battery leaked, and a condenser and transformer were missing. So I took the 100% working MPU3 out of my dads working slot machine (magic replay). I plugged it in my machine and turned the machine on. The TL lights turned on. All the other lights remained of. There was no sound. The hopper mechanism (not a hopper but a slide system) started to make a clicking noise. The message on the display said: ‘Coin peoeroud’ or something like that. This time the reels were stiff and I could not move them by hand. The noise didnt stop so I turned the machine off and back on. This time the ‘slider’ didnt make noise. The display showed two zero’s (00) at credits. I put coins in and they just came back out. At the back of the machine I triggered the coin mechanism by hand (so it would think i put in coins) and nothing happened. I turned the machine off. When I turned it on some weird symbols came up on the display. When I turned it on later it showed 2 zero’s again, but this time on the other side of the display. Then I discovered there was a wire loose. There was one wire sticking out of the white cable bundel. I uploaded the picture of this. I stuck the wire back in and a clicking noise came from somewhere near the transformator (correct word?). Nothing else happened. What should I do? The fuses are intact, the MPU is 100% working. Is the game itself (the ROM) broken? I am not really technical but I would like to learn some more and I would appreciate your help! I added a bunch of pictures for you to see whats going on. I can always make more just ask me. Thanks
