Search the Community
Showing results for tags 'error'.
Found 9 results
-
Hello, I’m new on this website/form and I’m wondering if someone could help my sold the problem i have with my barcrest machine. After my friends plays on it it stopt working, when i try to reset the machine nothing happens and the same error code keeps coming. Also when I pull the switch of memory reset nothing happens. Now I bought a new MPU5 board but with this board the machine does nothing only the board will flash red sometimes. Does anyone know how I can fix this issue, I like the machine so much.. that I keep trying but nothing helped yet. Regards, Matthijs
-
Hi there. I have a mayday machine of pick your pasos. I was playing one day and I got jackpot but had less than 20 in the pot and the alarm sounded. I turned off and on again like many times before to reset the payout but it got stuck with the LD1 Flashing, LD3, LD4, LD5 and LD2 are solid and L6 is off. The battery was removed before leakage and was working fine in a home environment. I have a video of boot up to show what happens if that helps anyone. Thanks
-
Hi does anyone know how to solve error code 16 mpu USB driver failed on a barcrest Elvis sitdown machine please.
-
Hi, A friend of mine bought 3 fruit machines Ambassador Gum, 3 with working bubblegum distributor, they where made for France or Belgium where money games are forbidden... Only one did turn on, the bassador 1000. The 3000 doesn't boot and the extra AG1000 will be the next project. Here's the restoration project for the Ambassador Gum 3000, MPU4 mod4. Following www.booze.net advices, thanks a million times Paul you convince me to do it, the battery has been removed, changed, and stuck outside the box. Mine had severe blue / greenish leakage damages from battery down to dataport. Audio amp, volume VR1 and neighbours look pretty bad.
-
Hi, I'm rebuilding 3x Ambassador Gum MPU4 victim of battery leakage. Vinegar bath, distilled water, new outboard battery,... The machine #2 itself is good and tested with a working mpu4. I'm working on MPU4 mod4 #1A : On start-up I have "AG3 0.2", the 4 wheels initialise but wheel C seems blocked, lights turn on and then "AL3" message is displayed and everything is blocked. The message error isn't in the error list, any idea ? Thanks Arno
-
Hi, I'm rebuilding 3x Ambassador Gum MPU4 victim of battery leakage. Vinegar bath, distilled water, new outboard battery,... The machine #1 itself is good and tested with a working mpu4. I'm working on MPU4 mod4 #1B : On start-up I have "AG3 0.2", the 4 wheels initialise, lights turn on and then "AGPR ERR" message is displayed and everything is blocked. I've tried different program module cartridges and always the same error. The message error isn't in the error list, any idea ? Thanks Arno
-
Hi, i switched on my machine as normal and it all seemed ok, then the display says reel error 2.1 and sounds an alarm. I dont know what has caused this it seems pretty random, I Any help would be appreciated as i have not got a clue what to do Thanks
-
Hi Everyone, Had this classic fruit machine, BAR-X, for a chrimbo present as a project - just a small fix i hope? Two connectors are not connected to the door switch and not sure which blade terminal to connect them to without getting some advice first. I've attached some photo's and wire colours, if any more are needed or any other questions, I will reply as quickly as possible. Blade 1 red with black banding Blade 2 nothing connected Blade 3 black (pair) Blade 4 nothing connected Blade 5 light brown with black banding Blade 6 nothing connected Unconnected wires are both light brown one has white banding, while the other has orange banding Not sure if it's called hoop or band that marks the main wire colour yet Thank you in advance and Happy New Year to you all. Regards, Patrick
-
Can anyone help me?????. I have a barcrest club frenzy that is displaying alarm 54-11 cpu bus error pc2a7f6 1ddcoooo**** i have replaced the mpu, the reel driver and the power supply but no change. Any ideas???
