Search the Community
Showing results for tags 'help'.
-
Hi All, Im new to the world of fruit machines, yes of course I’ve played them before many times but I’ve never had the pleasure of owning my own- until today 😊😊 I got my machine home and unfortunately I have only been supplied one key, the round type that is used to open the top door (front fascia). so my question is- is it easy to get replacement keys or is there an easier way round this? Also there isn’t any money in the machine so it comes up with the error 1 pound hop empty, other than putting £125 in it is there a way of resetting this please? Any help would be greatly appreciated. Thanks, Darren
-
Hi, sorry for the silly question but I've got an Electrocoin Centi cabinet but not sure what the locks are? I bought one years ago but while it fits okay, it's too long. The lock for the bottom doesn't have a key with it so I am looking to purchase a new one but not sure what size etc. The front of the lock from the very left to the right is 7/8 inches (not where the key goes in). Please can anyone help? I've seen some for sale on an arcade website but not sure they're exactly the same. They keys I've got for the other lock are all metal. I bought a small one ages ago but is much smaller and has a black handle on the key. Thanks in advance David F
-
hi guys would any body have a scorpion 2 tec manaul cops and robbers so i can put theses opto wires back where they should go many thanks
-
Hi all, I am a new member here so hello to all! I have a good collection of Fruit Machine Top Boxes, Lights, Toppers... I have just acquired an LED T7 Top Box (photos attached) the question is: I do not have a T7 terminal to connect this too. I have opened up the top box to see if it could be connected directly into UK mains (just to get the lights working for the man cave) by way of an adapter perhaps? Does anyone have any idea or which adapter i need? Any help would be appreciated. Cheers Jay
-
Hi all, I am a new member here so hello to all! I have a good collection of Fruit Machine Top Boxes, Lights, Toppers... I have just acquired an LED T7 Top Box (photos attached) the question is: I do not have a T7 terminal to connect this too. I have opened up the top box to see if it could be connected directly into UK mains (just to get the lights working for the man cave) by way of an adapter perhaps? Does anyone have any idea or which adapter i need? Any help would be appreciated. Cheers Jay
-
Here's my Problem I wonder if you can tell me how to connect a Note acceptor to a Pluto 6 fruit machine Board Please? I just cannot find anyone to tell me how; they just say too complicated. Can you be the one to tell me? It cannot be any harder than when I am connecting hardware into computers. I just need the cables with the proper inputs and outputs. If you can or not let me know. Thanks
-
Hello I wonder if you can tell me how to connect a Note acceptor to a Pluto 6 fruit machine Board Please? I just cannot find anyone to tell me how; they just say too complicated. Can you be the one to tell me? It cannot be any harder than when I build a computer for someone. I just need the cables with the proper inputs and outputs. If you can or not let me know. Thanks
-
I'm totally new to any of this but I have always wanted a fm in the front room and my partner picked this up yesterday for free it has all keys and powers on beautifully reels spin but then wow alarms sounding and shows the error code 2.4 I would greatly appreciate if anyone could help me with the restoration of this beautiful machine please I'd love to be able to use it and show my children and grandchildren just how cool the old machines are thank you in advance
-
Hi, how you all doing. I'm a tech that works from home home, I do my best to help all my customers with most electronic and electrical devices. We get all kinds of devices to repair and I would say the majority of work is Computers, Consoles and soldering work. Anyway, customer brought me two Scorpion 2 PCB's with Cops 'N' Robbers loaded, they were badly damaged around the battery area by battery corrosion which I have repaired. Scorpion 2 PCB starts up but has a System Error 96 on Boot, I'm thinking it could be the ROM, was hoping for some direction or corrupt image on ROM. Would be grateful for any help or direction, many thanks for reading this post.
-
mfme v 5.1 looking for this to play andy capps games
-
Hi I’m looking fir a scorpion 2 power wire as mine has to much corrosion on it, and corrosion has spread up the wires and ruined the crimps. Has anyone got one? Also would May consider a MPU to lol I know it’s a long shot. Thanks !
-
Hello, I'm hoping someone can help. I've got a Popeye system 5 fruit machine. When the sounds play some seem to be out of sync to the machine. Is this a problem with the sound rom and if so is anyone able to burn a new one? Kind regards, Steve
-
Hi Everyone Recently bought The Mob by MDM, and until now it has been faultless. Playing about with it this afternoon though, it has developed a strange fault where the display is showing random characters. This machine will still play, and payout, just doesn't display properly. I have traced the cables from the display down to the bottom of the MPU4 board, and both ends are secure. Looking for some guidance as to what to check next? Thanks in advance! Steven
-
Hi, I`am a new user here and used to play plenty of old fruit machines when a bit younger. And enjoyed playing adders and ladders plus a machine called the jester. Iwas looking for a site i used a long time ago in which i downloaded a file to enable roms to be added so i could play the old style fruit machines. I`am guessing this is the right place, but also noticed that the download section is not available to me at the moment, and was woundering how i could get to play those slots again. Been playing some facebook slots, but they are not the same and i do love the old style machines too, infact i did once own one, and if i had a place to put one i`d even buy a adders and ladders slot for my home. Anyway hope someone can help me out and show me how to play these games once again on my laptop. Thanks in advance Craig
-
Hi there. I have a mayday machine of pick your pasos. I was playing one day and I got jackpot but had less than 20 in the pot and the alarm sounded. I turned off and on again like many times before to reset the payout but it got stuck with the LD1 Flashing, LD3, LD4, LD5 and LD2 are solid and L6 is off. The battery was removed before leakage and was working fine in a home environment. I have a video of boot up to show what happens if that helps anyone. Thanks
-
Hi there I have recently brought an impulse Pick your pasos fruit machine. it had slight damage from battery leakage but i have fixed that. I was playing yesterday and it was all fine and then the PSU started making a weird noise. i moved the machine up some stairs and plugged it all back in but the power supply seemed to stop working. does anybody have the pin out for the PSU / Power Supply so i can check the voltages. Also, on the main board (the one with the game and sound cards) and the LD1, LD2 and LD6 are not lighting up at all and the ALPHA lcd board doesn't get power at all. its not the cables but i think its the screen its self. Thanks in advanced
-
Hi there. I'm not sure how to start a specific thread so I'm sorry if this annoys by posting in the new members section. Does anyone know of someone who will come out to take a look (and hopefully fix) my Barcrest Star Wars A New Hope machine. I'm in Liverpool. Left in an non working condition by the delivery people, much to my dismay. Any help would be great as this is my first machine and I'm completely useless. Thanks for your time.
-
hi everyone, I've got a faulty maygay mpu, its a 1989 machine and it says Maygay M1 version B I've been thinking I've got a m1b mpu but mine is an earlier model is it? would my machine take a m1a or m1b mpu or any other one for that matter? also if i find a used board that will work with my machine, what holds the specific memory for that machine to work in the correct way or is the programme the same for all machines of that age. i know this is basic electronics but its new to me, any help would be much appreciated. thanks pad
-
Hi guys I have acquired a Barcrest roadhog machine that I am trying to save . The problem is it has had the glass butchered to change the jackpot . I have a reasonable spare top glass from when I built my own but I need a good bottom glass . So if anyone has a good bottom glass or a pair I would be interested . Would be a shame to scrap it . Thanks in advance Regards Karl
-
Hi can someone help me. I have a Turboplay from Barcrest (G2 cabinet) mpu5 Coin Mech type SR5 parallel interface (Dutch model). It will not accept any coins i tried to teach (euro coins) The coin Mech was working perfect until i tried to hook it up to the site kiosk software. I think i changed the value and path. I hope there is someone that can help me. -
Hey all, I recently just bought my self a Club Monopoly 1.1 Fruit machine. I bought it for £50 knowing the coin input was not working. Still I bought it and found alls that was needed was the plug a leas into the mechanism. Anyway, now I just would like some help with other things. Firstly, I cant get the refill key to work on the machine. it fits and turns but nothing happens... Also the machine does not pay out when you ''Collect' it just makes a sound as if it is paying out when it doesn't. I know it isn't the solenoids as they work fine when i go into test mode. I'm not sure what the problem is but i think it may be because i cant get the cash box or back door switch to work so it may think they are open? Oh and one more thing. The machine plays sounds suck as features and so on but there is no music playing in the background like I thought there would be. I have seen two pins on the MPU that say speaker and there are two connectors that I think should go in there but when I tried it I blew a main 12 V fuse... Whoops. Any help would be appreciated. Thanks! Also i can send any pictures that are required
-
Hi all and thanks for accepting me, I have brought the most awesome fruit machine today (a Maygay Donkey Kong), it just spoke to me so I brought it! but its not working (knew it wasn't when I brought it but I just love it!) so I know I will be driving everyone mad until I get it working, Thanks in advance for your patience -
I have a Barcrest Pots of Money.It was recently switched on after a few years of neglect.It worked well for about 15 mins.Then there was some fizzing and it stopped working.The white power plug had a wire that appeared to be corroded.From the inside 2 holes were brown.I notice on the forums,that you cannot get a new plug.Being a total novice,could someone please tell me how to remove the wire and the internal plug clamps,clean/replace and refit.Do you also think that the socket on the mpu3 may also be damaged?
-
Hi Everybody, I have just picked up an old Maygay Coronation Street machine which does not work. I have some basic knowledge of what i should be looking at and seems to be the mpu is not coming out of reset to turn the +12v relay on. i just hope somebody here can help. Barry.
-
Hi, I hope somebody can help me. I have managed to pick up an old Maygay coronation Street machine which does not work. I have some basic knowledge of what i should be looking at but need some help. It seems like there is a problem with the mpu not coming out of reset to allow the +12v to work. Has anybody got any ideas? Barry.
