Search the Community
Showing results for tags 'monopoly'.
Found 4 results
-
Hi, i switched on my machine as normal and it all seemed ok, then the display says reel error 2.1 and sounds an alarm. I dont know what has caused this it seems pretty random, I Any help would be appreciated as i have not got a clue what to do Thanks
-
Hey all, I recently just bought my self a Club Monopoly 1.1 Fruit machine. I bought it for £50 knowing the coin input was not working. Still I bought it and found alls that was needed was the plug a leas into the mechanism. Anyway, now I just would like some help with other things. Firstly, I cant get the refill key to work on the machine. it fits and turns but nothing happens... Also the machine does not pay out when you ''Collect' it just makes a sound as if it is paying out when it doesn't. I know it isn't the solenoids as they work fine when i go into test mode. I'm not sure what the problem is but i think it may be because i cant get the cash box or back door switch to work so it may think they are open? Oh and one more thing. The machine plays sounds suck as features and so on but there is no music playing in the background like I thought there would be. I have seen two pins on the MPU that say speaker and there are two connectors that I think should go in there but when I tried it I blew a main 12 V fuse... Whoops. Any help would be appreciated. Thanks! Also i can send any pictures that are required
-
I recently bought a Maygay Club Monopoly machine. It's in need of new bulbs and locks, but also it's not filling properly. The pound coins fill tube A to the brim then jam, despite there being two other tubes free (B and C). 20p's fill fine. Can anyone help? I actually tried filling it again, and this time the coins got stuck in the filling mechanism. Now the machine is beeping loudly displaying 10p filling error! argh. Funnily enough if the back door opens it is accepting coins fine (although still not in the right tube. Someone please help, I'll try to upload a youtube video to demonstrate the problem..
-
Hey Everyone, I joined this forum a few days ago to try and get some advice and learn more about fruit machines in general as well as my Maygay club Monopoly machine (£250 jackpot). There are several articles similar on the internet however none of the advice given to those individuals has helped me so far. I've been working on this problem for 3 days off and on around work. I am quite confident to have a go and things being an electronics engineer however I do worry about irreparably damaging things I know very little about. I have a technical manual for my machine and cant help but think there should be a game manual as well but i haven't found a copy on the internet yet. The coin mechanism seems to be working for the most part it will direct all 10p and 50p pieces straight down to the cash box as it should. also all 20p pieces are routed in the correct tube and once full they will overflow down into the cash box correctly. The £1 coins are all directed into one of the three £1 tubes, it has a micro switch fitted top and bottom. I assume this is the correct one, as it has no mechanical overflow facility. Am I right in thinking once the top micro switch make contact with a coin, the mechanism should start sending coins into the other £1 tube? As the second tube has an overflow into the third tube which in turn has an overflow into the cash box. However this change over is not happening. the first £1 tube just fills up and up until it jams the coin mechanism. Also the light on the front to show that there is not enough money for an large payout is lit all of the time. I have removed and tested the micro switches on the tubes and replaced them back in their original positions, they all seem to be working, have a 12V feed in and when switched the power flows through the inbuilt diode and there is a 5V status change on the output that feeds all the way back to the board which is an M1b. Also I assume as the machine things it is low on funds it will not pay out £1 coins. I have had a pay out up to a maximum of £3 in 20p pieces but then it will lock up and an open back reset is required to clear it and continue playing. I have tested all of the payout solenoids and they all work in test mode but will not pay out during a game. When I called up an error report on screen I got the following information: Error 0 1.4 Error 1 1.4 Error 2 1.4 Error 3 2.5 Error 4 4.6 Error 5 4.2 However I have no information as to what they mean. The technical manual I have states a C435R Top Entry Validator however the machine has a ME115TS unit with a Me155 Coin Seperator Module. Is this possibly the issue? I am sorry for the essay but I was hoping to include as much as I could. I hope someone can help me get to the bottom of this problem. The back up battery is still on the board and from reading around I am seriously considering removing it and locating it somewhere else on fly leads. Is this a good idea? There is absolutely no damage to the board at the minute and the battery does look quite new. Thanks in advance for any help and if any more information is needed please ask and I will do my best to assist. Allan
